Resize VM Disk
Draft
This article is a draft. It only tells you how to increase a disk, and only if the disk is partitioned in a certain way. Also not tested by anyone else yet. (other then by the author of this article: Wouter)
Intro
When a virtual machine (VM) needs more disk space, you can expand its storage by resizing the disk in the Proxmox GUI and then adjusting the partition inside the VM using Linux commands. These steps only work if the root partition is at the end of the disk. (The automated install config/preseed ensures this)
Step 1
Before making any changes, you can confirm the current size of your disk. running `fdisk -l /dev/sda`, this lists partition table details of /dev/sda, showing its total size and partitions.
output should look something like this:
Next, to increase the disk 'physical' size:
- On Proxmox web gui: Select your VM then Hardware > Hard Disk > Disk Action > Resize
- Enter the new disk size and click OK
After resizing in Proxmox, check if the disk size change is recognized by the system by running `fdisk -l /dev/sda` again The total disk size should reflect the increased value. However, partitions remain unchanged. This means the top layer is aware of the size increase now we need to inform the other layers.
If the total disk size does not show an increase as expected, you may need to run `partprobe` to force the system to re-read the partition table without requiring a reboot.
Step 2
Resize the Partition to Use the Extra Space:
- Resize using 'parted':
This is assuming that you need to resize /dev/sda2 (which the 'print' command will help you determine)
* `parted /dev/sda`, opens the partition table editor for /dev/sda * `print`, double-checks the disk layout * `resizepart 2 100%`, choose partition you want to resize, here partition 2 is resized to use all available space * `quit`, exit parted
Step 3
To increase file system's size:
- 'resize2fs /dev/sda2' (Assuming you need to increase /dev/sda2)